HOW TO ENABLE AUTOMATIC CALIBRATION ? [GP-16xxx/11xxx/12xxx SERIES]

Created by admin admin Apr 16, 2018 05:35:49 AM Published in FAQ List 186 Views.

DIP switch can be found from printer bottom, open the DIP switch cover, turn switch 5 to ON position to disable this function, turn switch 5 to OFF position to enable this function.

 

When this function is enabled, different labels will be calibrated automatically. For example, you change 4”x4” label to 3”x6” label, turn on the printer and it will detect and calibrate, after calibration, press FEED button, labels will be fed one by one in right position.

 

Pay attention, after changing labels, make sure you set the same size label in label design software, then printer will print the label as per your design and stop at the right position.